JTC30 Coaxial Dual-Rotor Cleaning drone

JTC30 Coaxial Dual-Rotor Cleaning Drone

JTC30 Coaxial Dual-Rotor High-Pressure Cleaning Drone

The JTC30 is a professional high-pressure cleaning drone designed for high-rise buildings, facades, glass curtain walls, solar panels, roofs and other hard-to-reach surfaces. With a maximum flight altitude of up to 200 m and adjustable water pressure up to 4100 PSI, it provides an efficient solution for professional exterior cleaning.

Parameters:

Max Flight Altitude: 200 m

Water Hose: 160 m

Net Weight (without battery): 13 kg

Payload: 30 kg

Max Takeoff Weight: 55.7 kg

Battery: 14s 36000mAh*2

Max pressure: 4100psi (adjustable from 0-4100psi)

Flight time: 36-51 min; dual nozzles reduce time by 3 mins

Cleaning Efficiency: 1000-1500 ㎡/hour

Wind Resistance: 14 m/s

Spray boom length: 1- 1.5 m

Blast Flow Rate: 14 L/min

Operating Speed: 1m/s

Blast Width: 0- 50 cm

Motors:  Four axles and eight motors, X8

Propeller Model: 3011

Power: 5.8 kW

Current: 150 A

Optional parts of cleaning drones :

单摇摆喷头： Cleaning drones can install a single oscillating nozzle,， Front swing nozzle

双喷洒摇摆系统： Cleaning drones can install a dual-swinging spray system

JTC30 Cleaning Drone Applications

High-Rise Building Cleaning

The JTC30 cleaning drone is designed for exterior cleaning of high-rise buildings and other difficult-to-access structures. It can deliver high-pressure water from the ground to elevated surfaces, reducing the need for workers to operate directly at height.

Facade Cleaning

Use the JTC30 for cleaning building facades, exterior walls and commercial surfaces affected by dust, dirt, stains and other contaminants.

Glass Curtain Wall Cleaning

The JTC30 can be configured for cleaning glass curtain walls and large exterior glass surfaces on commercial and high-rise buildings.

Solar Panel Cleaning

The JTC30 can also be used for photovoltaic panel cleaning and solar farm maintenance. Different nozzle configurations can be selected according to the cleaning requirements.

Roof Cleaning

The drone can be used for roof washing, including tile roofs and other hard-to-access exterior surfaces.

Why Choose the JTC30 Cleaning Drone?

The JTC30 combines a coaxial dual-rotor drone platform with a high-pressure cleaning system to provide a flexible solution for professional exterior cleaning.

Key advantages include:

• Up to 200 m maximum flight altitude
• Up to 4,100 PSI adjustable water pressure
• 160 m water hose
• 36–51 minutes flight time
• Cleaning efficiency of approximately 1,000–1,500 m²/hour
• Suitable for high-rise building cleaning
• Suitable for facade and glass cleaning
• Suitable for solar panel cleaning
• Suitable for roof cleaning
• Designed for professional and commercial cleaning applications

Dual swinging spray boom weight: 3 kg

Nozzle Oscillation Angle: 20-25 degrees (25 degrees provides optimal performance, but operating speed is slower.)

Features:

1. Small size, heavy load capacity, strong pulling force, 8 motors, maximum height of 200 meters, easy to store and transport. The small body can pass through narrow places, making it more flexible and convenient.
2. Quadcopter with eight propellers in a coaxial configuration provides ample power, strong pull, and high motor redundancy (40%);
3. Propeller failure protection: the drone can keep balance and land safely even if a single motor or propeller fails 
4. Compact structure so the drone has strong wind resistance with max 12m/s.

5. Supports a dual swinging spray system, allowing for seamless switching between foam and water spray in mid-air, improving operational efficiency.

6. The drone has a stable fuselage, and the recoil generated at the moment of opening the water has little impact on the fuselage balance, resulting in stable flight.

Battery compartment: Made of aluminum alloy, with a snap-on cover and built-in heat dissipation vents to protect the battery.

• Frequently Asked Questions

  How high can the JTC30 cleaning drone fly?

  The JTC30 has a maximum flight altitude of up to 200 m, depending on the operating environment and configuration.

  What is the maximum pressure of the JTC30?

  The JTC30 cleaning system provides adjustable water pressure up to 4,100 PSI.

  What can the JTC30 cleaning drone clean?

  The JTC30 can be used for high-rise buildings, facades, glass curtain walls, solar panels, roofs and other exterior surfaces.

  Can the JTC30 clean solar panels?

  Yes. The JTC30 can be configured for solar panel cleaning applications with suitable nozzle configurations.

  Is the JTC30 suitable for high-rise buildings?

  Yes. The JTC30 is specifically designed for professional high-rise and hard-to-reach exterior cleaning applications.

  Contact JOYANCE TECH

  Grace Sun – JOYANCE TECH

  WhatsApp / WeChat: +86 153 1898 3625
  Email: sales@joyancetech.com
  Official Website: joyance.tech

• 200m exterior cleaning drone

• 200m pressure cleaning drone

• high-rise glass cleaning drone

• high-rise facade washing drone

• skyscraper cleaning drone

• skyscraper window cleaning drone

• tower building cleaning drone

• exterior wall cleaning drone

• high-rise exterior wall cleaning drone

• high-rise pressure washing drone

• high-rise building pressure washing drone

• high-rise building facade washing

• high-rise cleaning drone manufacturer

• high-rise cleaning drone supplier

• high-rise cleaning drone factory

• high-rise cleaning drone for sale

• high-rise cleaning drone price

• building cleaning drone manufacturer

• building washing drone manufacturer

• facade cleaning drone manufacturer

• commercial cleaning drone

• professional building cleaning drone

  contact Grace sun whatsapp +8615318983625